Honeycomb Enail Dab Kit

Latest enail controller on Puffing Bird!

Enail controller is designed to allow you to digitally customize your temperature! Simply snap in the XLR quick-disconnect heater coil and turn on the power switch and the unit will heat up to your pre-programmed temperature. Setting the temperature is easy, just use the up and down arrows only to achieve your desired temperature. 

Specifications:

• Input voltage110/220V
• Output capacity: 100W/150W
• Built-in Thermocouple and Fireproof Kevlar Sheath
• 2 x Built-in USB Ports to charge 
• Dual-Fuse Inside for Device Protection and Safety Guaranty
• Support temperature: 0°C-710°C / 0°F-1300°F
• Heating box size: 150*120*45mm

Including:

• 1* Honeycomb E-nail box with digital PID temperature controller
• 1* 20 mm long heating coil with Kevlar sheath (10mm/16mm/20mm diameter coil)
• 1* 180mm long power cord
• 1* Cardboard gift box
• 1* User manual

Use Instructions:

1. Plug-in power cord and coil cord into the unit .
2. Once the unit has been plugged into a power socket, press the power button (silver round button ) to power the unit on . Only power on the unit when the coil is attached to the provided nail securely.
3. Unite is set to automatically reach the desired “low temp ” temperate of 710 degrees Fahrenheit.
4. Press & Hold the up-down & side arrows to select your own desired temperature (100-999 Fahrenheit )
5. Power off the unit when not in use.

Category: Enail&Dab Pens